2-in-1 Sheet and Tube Laser Cutter | Automatic Laser Cutting System
$36,300.00
2-in-1 sheet and tube laser cutter with automatic loading. CNC laser cutting system for metal sheets, round, square & rectangular pipes. High efficiency, save floor space. Get quote!
- Description
- Additional information
Description
One Machine. Two Processes. Unlimited Possibilities.
You need to cut both sheet metal and tubes, but buying two separate machines means doubling your investment, consuming twice the floor space, and managing two sets of maintenance schedules. For most fabrication shops, this simply doesn’t make sense.
The YIHAI LASER TF-1530 solves this problem. It combines a 1530×3050mm sheet cutting table with a 6200mm tube processing unit in a single integrated system. One machine, one operator, one workflow – covering both flat sheets and round/square tubes up to 230mm in diameter.
This isn’t just a cost-saving measure. It’s a productivity multiplier. Switch between sheet and tube cutting in under two minutes. Reduce material handling. Eliminate the inefficiency of moving parts between different machines. And do it all with the ±0.03mm accuracy that modern fabrication demands.
Key Components & Design Highlights
Plug-In Dual Keel Machine Bed – Built for Stability
The bed is constructed from heavy-wall steel tubing using an interlocking dual-keel structure – not conventional bolted assemblies. This design distributes loads evenly and provides superior vibration damping during high-speed cutting. After welding, the entire bed undergoes vibration stress relief and annealing to eliminate residual stress, ensuring dimensional stability over decades of use.
Why it matters: Consistent accuracy over the full 1530×3050mm sheet and 6200mm tube length. No thermal distortion, no alignment drift.
Lightweight Aluminum Alloy Gantry – Speed Without Sacrifice
The moving gantry is fabricated from aerospace-grade aluminum alloy – significantly lighter than steel equivalents while maintaining torsional rigidity. This reduces moving mass, enabling faster acceleration and deceleration without compromising positioning accuracy.
Why it matters: Faster cycle times. Precise small-hole cutting. Smooth contours on complex parts.
Intelligent Laser Cutting Head – Auto-Focus, Auto-Adjust
Equipped with capacitive height sensing and auto-focus capability, the cutting head maintains optimal focus distance regardless of material variations. The multi-layer protective lens design extends maintenance intervals, while the quick-change module allows lens replacement in under 60 seconds.
Why it matters: Consistent cut quality across different materials and thicknesses. Less downtime for maintenance.
Modular Tooth-Type Slat Worktable – Built for Production
The 1530×3050mm worktable features a modular slat design that minimizes contact area with the sheet – reducing heat transfer and preventing slag adhesion. Individual modules can be replaced when worn, eliminating the need for full table replacement.
Why it matters: Lower maintenance costs. Faster replacement. Better cut quality on the bottom edge.
Tube Clamping System – One System, Multiple Profiles
The side-mounted pneumatic clamping system handles round tubes, square tubes, rectangular tubes, elliptical tubes, angle steel, and channel steel. The dual-chuck design provides automatic centering and adjustable clamping force – firm enough for heavy-wall tubes, gentle enough for thin-wall profiles.
Why it matters: One machine handles your entire tube inventory. No tooling changes between profile types.
Industrial Water Chiller – Dual-Circuit Cooling
The dedicated chiller provides separate cooling circuits for the laser source and cutting head, maintaining ±1°C temperature stability. Automatic flow and temperature alarms protect critical components.
Why it matters: Stable laser output. Longer component life. Consistent cut quality even during extended shifts.
Zoned Fume Extraction – Clean Air, Lower Energy
The extraction system activates only the zones directly under the cutting head based on real-time position. This targeted approach removes smoke and particles efficiently while reducing energy consumption compared to full-table extraction.
Why it matters: Cleaner workshop environment. Lower operating costs. Reduced filter maintenance.
Automatic Lubrication – Set It and Forget It
Programmable lubrication system delivers precise oil quantities to guide rails, racks, and ball screws at scheduled intervals. Customizable settings for lubrication area, duration, and frequency.
Why it matters: Reduced manual maintenance. Extended component life. Consistent motion accuracy.
Intelligent CNC Control System – Built for Dual-Purpose Cutting
The professional-grade control system is optimized specifically for sheet and tube cutting applications. It supports advanced functions including flying cutting, bevel cutting, remnant cutting, and automatic centering. The integrated TubePro software handles round tubes, square tubes, angle steel, and channel steel with intelligent nesting and common-edge cutting.
The wireless handheld controller allows operators to perform setup, edge finding, and positioning directly at the machine – no need to return to the control station for every adjustment.
Why it matters: Faster programming. Higher material utilization. Less operator walking time.
Key Component Traceability
We use components from established suppliers with proven reliability:
| Component | Supplier |
|---|---|
| Linear guides | HIWIN / TBI (Taiwan) |
| Servo system | Inovance / Yaskawa |
| Electrical components | Schneider / Omron |
| Pneumatic components | SMC / AirTac |
| Reducer | KOFON / Shinpo |
What Makes This Dual-Purpose Laser Cutter Different?
Most fabrication shops eventually face a dilemma: invest in separate sheet and tube cutting equipment, or outsource one of the processes. Both options have hidden costs – capital expenditure, floor space, logistics, quality control, and lead times.
The TF-1530 eliminates this trade-off entirely. It delivers both capabilities in one compact footprint (8900×3750×2100mm) while maintaining the cutting performance of dedicated machines.
Here’s what you get:
-
1530×3050mm sheet capacity – handles standard 5×10ft sheets with full-edge cutting capability.
-
6200mm tube length capacity – processes round tubes (Ø15-230mm), square tubes (□15-230mm), angle steel, and channel steel.
-
Instant mode switching – transition between sheet and tube cutting in under 120 seconds via the CNC control interface.
-
Single operator workflow – one person can manage both processes, reducing labor costs.
-
Shared laser source – the same high-power fiber laser serves both cutting stations, maximizing utilization.
The result? Equipment investment reduced by 40-50%. Floor space saved by 30% or more. Labor costs optimized. And a single point of maintenance instead of two.
Applications – Who Needs a Dual-Purpose Laser Cutter?
Hardware and Sheet Metal Fabrication
-
Electrical cabinets, equipment enclosures, protective covers, hardware brackets
-
Cut both flat sheets for enclosures and square tubes for frames on one machine
-
Eliminate work-in-progress inventory between sheet and tube departments
Steel Structure and Infrastructure
-
Carbon steel plates, structural profiles, channel steel, angle steel
-
Produce connectors, curtain wall components, bridge parts, embedded elements
-
Handle both plate and profile cutting for complete structural assemblies
Furniture and Lighting Manufacturing
-
Stainless steel, aluminum alloy, cold-rolled steel for frames, supports, display racks
-
Complex designs often combine sheet and tube elements – one machine does both
-
Ideal for custom orders requiring frequent material and profile changes
Advertising and Signage
-
Stainless sheets, galvanized steel, aluminum, thin-wall profiles
-
Cut metal letters, signs, light box frames, display stands
-
High-speed cutting of both flat and tubular components for signage systems
Fitness Equipment Manufacturing
-
Round tubes, square tubes, elliptical tubes, and flat sheets
-
Produce treadmill frames, strength equipment, protective panels, connecting components
-
Tube cutting plus sheet blanking in one continuous workflow
Storage Equipment and Logistics
-
Carbon steel, galvanized sheets, metal tubes for shelving systems, racks, pallets
-
Both structural tubes and flat shelf components processed on one machine
Why Choose YIHAI LASER?
-
12+ years of laser equipment manufacturing experience
-
ISO 9001 and CE certified – built to international standards
-
Factory-direct pricing – no middleman markups
-
60+ countries served globally
-
2-year warranty on laser source
-
24/7 technical support with remote diagnostics
-
Spare parts shipped within 24 hours
-
Free sample testing available
Frequently Asked Questions
How does the machine switch between sheet and tube cutting?
The process is entirely software-controlled. Select “Sheet Mode” or “Tube Mode” from the CNC interface. The system automatically moves the cutting head to the appropriate workstation, loads the corresponding parameters, and begins cutting. No physical reconfiguration, no tooling changes, no recalibration. The entire switch takes under two minutes.
What materials can this machine cut?
Sheet: carbon steel, stainless steel, aluminum alloy, galvanized steel, brass, copper (with appropriate settings). Tube: round, square, rectangular, elliptical profiles in the same material range. The machine also processes angle steel, channel steel, and other structural profiles.
Do I need two separate operators for sheet and tube cutting?
No. One operator can manage both workstations. While the machine cuts on one station, the operator can load material on the other. This continuous workflow maximizes machine utilization and minimizes idle time.
How much floor space does the machine require?
The machine footprint is 8900×3750mm. Allow additional clearance for loading/unloading (approximately 1-2 meters on each side). Total recommended space: approximately 11×5.5 meters.
What maintenance does the machine require?
Daily: Clean the cutting head lens and check alignment. Weekly: Clean the worktable and extraction zones. Monthly: Check lubrication levels and inspect guide rails. The automatic lubrication system handles the routine greasing of transmission components.
How long does the laser source last?
Fiber laser sources are rated for 80,000-100,000 hours of operation. At 8 hours per day, 5 days per week, this translates to 40-50 years of service life. The laser source is covered by a 2-year warranty.
Can I cut both sheets and tubes in the same program?
Yes. For parts that require both sheet and tube components, you can program the entire workflow – cut all sheet parts, then switch to tube mode and cut all tube parts – without operator intervention between material changes.
What’s included in the purchase price?
The complete system includes: fiber laser source, cutting head, worktable, tube clamping system, servo drive system, chiller, fume extraction, CNC controller, software, automatic lubrication system, lens set, nozzle set, and consumables starter kit. Training and support are also included.
Additional information
| Weight | 2000 kg |
|---|---|
| Dimensions | 320 × 620 × 150 cm |
| Laser Power Options | 1500W – 12000W |
| Laser Source | Raycus / MAX / IPG (selectable) |
| Max. Sheet Processing Size | 1530 × 3050 mm |
| Max. Tube Processing Diameter | Round: Ø15-230mm / Square: □15-230mm |
| Max. Tube Processing Length | 6200 mm |
| Positioning Accuracy | ±0.03 mm |
| Repeatability | ±0.02 mm |
| Max. Travel Speed (X/Y Linkage) | 115 m/min |
| Max. Acceleration | 0.8G |
| Machine Dimensions | 8900 × 3750 × 2100 mm |
| Machine Weight | 4225 kg |
