Four tricks to prevent laser cutting heads from collision, easily solving cutting problems

1. Adjust the soft limit

First, enable the soft limit function on the height adjuster, open the setting interface, find the Z-axis travel option, and set the Z-axis travel to a position about 5-10 mm away from the rack. This can prevent the rack from burning due to excessive friction, and can also avoid soft limit or lower limit alarms due to uneven table tops.

2. Enable advanced functions

In the software cutting parameter settings, select advanced parameters and enable real-time calibration and active anti-collision vibration suppression functions. These advanced functions can help the system better sense the position and status of the cutting head, so that timely corrections and adjustments can be made when a collision occurs.

3. Reasonable parameter settings

In the software cutting parameter settings, set the upper table height to a suitable position. In addition, in the global parameter settings, check the use of frog jump-style upper table, intelligent obstacle avoidance frog jump, and intelligent optimization probe plate functions. These functions can help the system better adapt to different cutting needs and improve cutting efficiency.

4. Graphic settings

In the graphic settings, you can set gaps or micro joints. The number and size of micro joints can be determined according to the shape of the graphic. These settings can make laser cutting more flexible and precise, and effectively reduce the risk of collision.

In general, solving the anti-collision problem of the laser cutting head needs to start from multiple aspects. Through the soft limit setting of the height adjuster, the activation of advanced functions, the reasonable setting of parameters and the setting of graphics, the anti-collision performance of the laser cutting head can be effectively improved and the service life of the equipment can be extended. At the same time, it is also necessary to pay attention to regular inspection and maintenance of the equipment during use to ensure the normal operation and use effect of the equipment.